Manual

AT-S47 Management Software User’s Guide
147
Change of Settings
Module Status
D:H:M:S: Mx MN ‘yyyyy’ Module Name changed.
Mx: Module Number
MN: Module Name (‘yyyyy’)
D:H:M:S: Mx L-Act
D:H:M:S: Mx L-Sdwn
Mx: Module Number
Status: Local Port-
Active/Shutdown
D:H:M:S: Mx R-Act
D:H:M:S: Mx R-Sdwn
Mx: Module Number
Status: Remote Port-
Active/Shutdown
D:H:M:S: Mx LKTest-D
D:H:M:S: Mx LKTest-E
Mx: Module Number
Status: Link Test -
Disabled/Enabled
D:H:M:S: Mx ML-D
D:H:M:S: Mx ML-E
Mx: Module Number
Status: Missing Link -
Disabled/Enabled
Administration
D:H:M:S: Ping-Start
‘xx.xx.xx.xx’
Pinging started.
‘xx.xx.xx.xx’: IP address
D:H:M:S: Ping-Stop
S=s1, R=r1, L=l1
Pinging ended.
s1: sent packets
r1: received packets
l1: lost packets
D:H:M:S: Syslog-Address
‘xx.xx.xx.xx’
Set the SysLog Server
Address.
‘xx.xx.xx.xx’: IP address
D:H:M:S: Syslog-FCode ‘x’ Set the SysLog Facility
Code.
‘x’: Facility code
D:H:M:S: Log-Start Activity Log started.
D:H:M:S: Log-Stop Activity Log ended.
System
D:H:M:S: SysName ‘xxxxx’ System Name changed.
‘xxxxx’: System Name
Status Activity Explanation