Operation Manual

Operations Manual
121
IP Address
Translation Table
The TCP/IP IP address translation table contains mappings of Internet
addresses to MAC addresses, except for the Internet addresses itself.
The parameters are Read/Write, according to TCP/IP MIB-II; however, the
switch has the restriction that a dynamic entry should not be modified,
except to be made “invalid” (any other modifications will cause a static
entry to be created).
When adding a row, the following defaults are used:
❑ ipNetToMediaIfIndex is obtained from the row's instance identifier
❑ ipNetToMediaPhysAddress defaults to 0
❑ ipNetToMediaNetAddress is obtained from the row's instance
identifier
❑ ipNetToMediaType defaults to “static”
TCP Group
The AT-4016TR supports the TCP Group.
SNMP Group
snmp {mib-2 11}
The TCP/IP SNMP Group parameters are
described below.
snmpInPkts {snmp 1} Counter Read-Only
The number of SNMP PDUs received by the
AT-4016TR.
snmpOutPkts {snmp 2} Counter Read-Only
The number of SNMP PDUs created by the
AT-4016TR.
snmpInBadVersions {snmp 3} Counter Read-Only
The number of SNMP PDUs received by the
AT-4016TR which had an unsupported SNMP
version.
snmpInBadCommunityNames{snmp 4} Counter Read-Only
The number of SNMP PDUs received by the
AT-4016TR which had an unrecognized SNMP
community name.