Manual

Chapter 10: Bandwidth Control
124
Setting Storm Control
This procedure explains how to set DLF, broadcast, multicast, and
threshold levels for each port on the AT-FS750/24POE and AT-FS750/48
switches.
To change the default settings of the storm control feature, do the
following procedure:
1. From the main menu on the left side of the page, select the Bridge
folder.
2. From the Bridge folder, select Bandwidth Control.
3. The Bandwidth Control folder expands.
4. From the Bandwidth Control folder, select Storm Control.
The Storm Control page is displayed. A partial view is shown in Figure
39.
Figure 39. Storm Control Page