Operation Manual

AT-RG613/623TX Residential VoIP Gateway - User Manual 21
Appendix A: Troubleshooting
This Appendix describes some of the more common problems that may occur
during AT-RG613/623TX installation and use.
In the event of a problem, please look at the LED indications and then refer to this
Appendix.
LED indication
10BASE-T/100BASE-TX Port LED
This indicates the status of the 10BASE-T/100BASE-TX Port.
Table 6: 10BASE-T/100BASE-TX Port LED
LED Colour Statement Detail
LINK/ACT/SPD Green light on Establishment of the link
as 10/100 BASE – TX.
flash Establishment of the link
as 10/100 BASE – TX.
off The link is not established.
STATUS LED
This indicates the status of the system.
Table 7: Status Led
LED Statement Detail
SYSTEM Orange light on An abnormal operating condition.
Off The system is working normally.
Power Green lights on The device is receiving power and the
voltage is within the acceptable range.
Off The device is not receiving power.
TEL LED
It indicates the status of telephone.
Table 8: Status Led
LED Statement Detail
TEL Green light on LED light turns green when you lift the