Operation Manual

AT-RG213 Residential VoIP Gateway - SIP Software Reference Manual
SIP Software Release 6-0-0
J613-M0524-00
78
Call Wait Dur. (sec) 30
----------------------------------------------------------
Phone 1
----------------------------------------------------------
Ring Freq (Hz) Cadence (msec)
----------------------------------------------------------
25 1000 4000
----------------------------------------------------------
Tone Freq (Hz) Cadence (msec)
----------------------------------------------------------
Ring 425 1000 4000
Dial 425 1000 0
Busy 425 500 500
Disc 425 500 500
Wait 425 500 500
----------------------------------------------------------
Gain
Tx (dB) 0
Rx (dB) 0
----------------------------------------------------------
Input Buffer
Length (msec) 120
Threshold (msec) 0
----------------------------------------------------------
Impedence
Impedence 600R
----------------------------------------------------------
General
VAD ON
Digit Tout (sec) 3
Lec Length (nframe) 64
Default Call PSTN
Prefix *
Call Wait Tone ON
Call Wait Dur. (sec) 30
------------------------------------------------------------
Table 23. Parameters displayed in the output of the SHOW PHONE
command.
Parameter Meaning
RING
Ring parameters RING cadence and RINGFREQ
TONE
Tone parameters for Ring, Busy, Dial, Disconnect
and Wait
GAIN
Gain applied to audio signal. TXGAIN is to the
network, RXGAIN is from the network
INPUT BUFFER
Input buffer parameters BUFLEN and BUFTHR
IMPEDENCE
Interface equivalent circuit
VAD
If ON means that Voice Activation and silence
Detection is active
DIGIT TOUT
Timeout before call send