Operation Manual
Phone
SIP Software Release 6-0-0
J613-M0524-00
77
Short Syntax
SH PHONE [PORT=port | RING | RINGFREQ | TRING |
TRINGFREQ | TDIAL | TDIALFREQ | TBUSY | TBUSYFREQ |
TDISC | TDISCFREQ | TWAIT | TWAITFREQ | TXGAIN |
RXGAIN | IMPEDENCE | BUFFLEN | BUFFTHR | VAD |
DIGITTOUT | LEC | DEFAULTCALL | PREFIX | CWAITT |
CWAITD]
where:
port is the physical port number (can be 0 or 1)
Description
This command shows the phone ports configuration. To get information on
all the ports the command must be used without any option.
To get a specific parameter, like RING, the port must be indicated along
with the required parameter. The parameter is returned as is, since this
command invocation is designed for web interface.
Figure 22. Example output from the SHOW PHONE command.
01234567890123456789012345678901234567890123456789
FXS Ports Configuration
------------------------------------------------------------
Phone 0
----------------------------------------------------------
Ring Freq (Hz) Cadence (msec)
----------------------------------------------------------
25 1000 4000
----------------------------------------------------------
Tone Freq (Hz) Cadence (msec)
----------------------------------------------------------
Ring 425 1000 4000
Dial 425 1000 0
Busy 425 500 500
Disc 425 500 500
Wait 425 500 500
----------------------------------------------------------
Gain
Tx (dB) 0
Rx (dB) 0
----------------------------------------------------------
Input Buffer
Length (msec) 120
Threshold (msec) 0
----------------------------------------------------------
Impedence
Impedence 600R
----------------------------------------------------------
General
VAD ON
Digit Tout (sec) 3
Lec Length (nframe) 64
Default Call PSTN
Prefix *
Call Wait Tone ON