Operation Manual

Preface
SIP Software Release 6-0-0
J613-M0524-00
ix
Structure of this Manual
This manual is organised into the following chapters:
 Chapter 1, Operation describes general operation, management and support
features, including user authentication, down-line loading and installing
software releases.
 Chapter 2, Internet Protocol (IP) describes the implementation of the Internet
Protocol (IP) and all the commands related to IP network configuration
management.
 Chapter 3, DNS describes the commands related to the internal DNS client
implementation
 Chapter 4, SIP describes SIP protocol, the related call processes and all the
commands related to SIP configuration management.
 Chapter 5, Simple Network Management Protocol (SNMP) describes the
SNMP service provided by the gateway, and how to configure SNMP
interfaces.
 Chapter 6, Phone describes the L2TP service provided by the gateway and its
configuration and managementl.
 Chapter 7, Phone describes all available settings of the phone and the
commands related to the phone interfaces configuration.
 Chapter 8, Switch (SW) describes the commands related to the integrated
Switch configuration.
 Glossary contains definitions of terms and concepts used in this manual.
 Index is a master index to topics and commands covered in this manual.
Standards and Protocols
Supported Standards and Protocols
Table 1 lists the protocols and standards supported by the AT-RG213
Residential Gateway and the references where these protocols and standards
are defined.
Table 1. Protocols and standards supported by the AT-RG213 Gateway.
Protocol/standard Reference
ARP RFCs 826, 925.
Assigned Numbers RFC 1700.
DHCP RFCs 1541, 1542.