Operation Manual

AT-RG213 Residential VoIP Gateway - SIP Software Reference Manual
SIP Software Release 6-0-0
J613-M0524-00
74
Example 3
To modify the prefix used to change from the set network to the other one
(in this example from VOIP to PSTN), type the command:
SET PHONE PORT=0 PREFIX=#
After the execution of this command, to make a PSTN call when VOIP is set
as default, simply type the #. key on the phone.
To see the setting of the modified port:
SHOW PHONE PORT=0
Command Reference
SET PHONE
Syntax
SET PHONE PORT=port [RING=ton;toff 3*[;ton;toff]]
[RINGFREQ=rfreq] [TRING=ton;toff 3*[;ton;toff]]
[TRINGFREQ=tfreq] [TDIAL=ton;toff 3*[;ton;toff]]
[TDIALFREQ=tfreq] [TBUSY=ton;toff 3*[;ton;toff]]
[TBUSYFREQ=tfreq] [TDISC=ton;toff 3*[;ton;toff]]
[TDISCFREQ=tfreq] [TWAIT=ton;toff 3*[;ton;toff]]
[TWAITFREQ=tfreq] [TXGAIN=gain] [RXGAIN=gain]
[IMPEDANCE=impedance] [BUFFLEN=blen] [BUFFTHR=bthr]
[VAD={ON|OFF}] [DIGITTOUT=dtout] [LEC=lecframe]
[DEFAULTCALL={PSTN|VOIP}] [PREFIX=digit]
[CWAITT={ON|OFF}] [CWAITD=duration]
Short Syntax
S PHONE PORT=port [R=ton;toff 3*[;ton;toff]]
[RF=rfreq] [TR=ton;toff 3*[;ton;toff]] [TRF=tfreq]
[TD=ton;toff 3*[;ton;toff]] [TDF=tfreq]
[TB=ton;toff 3*[;ton;toff]] [TBF=tfreq]
[TDI=ton;toff 3*[;ton;toff]] [TDIF=tfreq]
[TW=ton;toff 3*[;ton;toff]] [TWF=tfreq] [TXG=gain]
[RXG=gain] [IMP=impedance] [BLEN=blen] [BTHR=bthr]
[VAD={ON|OFF}] [DT=dtout] [LEC=lecframe]
[DEFAULTCALL={PSTN|VOIP}] [PREFIX=digit]
[CWAITT={ON|OFF}] [CWAITD=duration]
where:
 port is the physical port number (can be 0 or 1)
 ton a time interval expressed in msec within 0,5000 range