Operation Manual

AT-RG213 Residential VoIP Gateway - SIP Software Reference Manual
SIP Software Release 6-0-0
J613-M0524-00
66
Examples
To see the L2TP tunnel configuration and its status, use the command:
SHOW L2TP
See also
ENABLE L2TP
DISABLE L2TP
Figure 18. Example output from the SHOW L2TP command
L2TP Configuration
--------------------------------------------------
Enabled
Session Created
LNS IP 20.20.20.2
Configured Tunnel IP 20.20.20.1
Negotiated Tunnel IP 20.20.20.1
Remote Tunnel IP 20.20.20.2
Password test
Tunnel Status Active
Tunnel ID 1234
Session ID 5678
Call Serial Num. 10
LCP Mru 1500
LCP Magic Num. 14234
--------------------------------------------------
Table 18. Parameters displayed in the output of the SHOW L2TP
command
Parameter Meaning
LNS IP
IP Address of remote L2TP server.
CONF. TUNNEL IP
IP Address of local L2TP tunnel.
NEGOT. TUNNEL IP
Negotiated IP Address of local L2TP tunnel.
REMOTE TUNNEL IP
IP Address of remote L2TP tunnel.
PASSWORD
Password used to authenticate the tunnel.
TUNNEL STATUS
Actual L2TP tunnel state.
TUNNEL ID
L2TP Tunnel ID.
SESSION ID
L2TP Session ID.
CALL SERIAL NUM.
L2TP Call Serial Number.
LCP MRU
Maximum Receive Unit of the PPP session.
LCP MAGIC NUM.
Magic Number of the PPP session.