Operation Manual

AT-RG213 Residential VoIP Gateway - SIP Software Reference Manual
SIP Software Release 6-0-0
J613-M0524-00
viii
 one 10/100 BaseT/Base FX Ethernet port for uplink (WAN port)
 three 10/100 Base T Ethernet ports for connecting user equipment (pc, printer,
etc.)
 Vlan Tagging configuration and management as defined in IEEE 802.1Q
 two VoIP ports for connecting two analog telephones or faxes
 Connection to PSTN line
 Switching function using the same analogue terminal from VoIP to PSTN
 Compliant with SIP protocol (RFC 3261)
 IGMP snooping configuration and management
 TFTP - Trivial File Transfer Protocol support
 NTP - Network Time Protocol support
 Configuration and management of the device through:
o Serial interface (CLI)
o Telnet
o SNMP
o Zero Touch Configuration
Intended Audience
This manual is intended for the system administrator, network manager or
communications technician who will configure and maintain the AT-RG213,
or who manages a network of AT-RG213 Gateways.
It is assumed that the reader is familiar with:
 The topology of the network in which the AT-RG213 Gateway is to be
used.
 Basic principles of computer networking, routing protocols and
interfaces.
 Administration and operation of a computer network.
 This manual is not intended for users who will use the computer
network to access network services from their terminal, personal
computer or workstation.
 Most of the commands described in this manual require MANAGER
privilege and can only be entered from a terminal or port that has been
assigned MANAGER privilege.