Operation Manual

L2TP

SIP Software Release 6-0-0

J613-M0524-00

20.20.20.1 vand the remote L2TP server with IP address 20.20.20.2, using the

authentication password “test”, use the command:

CREATE L2TP LNSIP=20.20.20.2

LOCALTUNNELIP=20.20.20.1 PASSWD=test

See also

ENABLE L2TP

DISABLE L2TP

DELETE L2TP

SHOW L2TP

DELETE L2TP

Syntax

DELETE L2TP LNSIP=ipaddr LOCALTUNNELIP=ipaddr

[PASSWD=passwd]

where:

 ipaddr : is an IP address in dotted decimal notation.

Short Syntax

D L2TP LNSIP=ipaddr LTUNIP=ipaddr [PASSWD=passwd]

Description

This command deletes a L2TP tunnel between the RG and the LNS server

specified into the command line.

The LNSIP parameter specifies the IP address of the remote L2TP server.

The LOCALTUNNELIP parameter specifies the IP address of the local L2TP

LAC.

Examples

To delete a L2TP tunnel between the local L2TP LAC with IP address

20.20.20.1 and the remote L2TP server with IP address 20.20.20.2, use the

command:

DELETE L2TP LNSIP=20.20.20.2

LOCALTUNNELIP=20.20.20.1