Operation Manual

AT-RG213 Residential VoIP Gateway - SIP Software Reference Manual
SIP Software Release 6-0-0
J613-M0524-00
60
 name is the name of specified community (can be any alphanumeric string)
which serves as a password for either retrieving (GET), modifying (SET) or
accepting trap messages (TRAP). The maximum number of characters is 200.
Description
This command sets one COMMUNITY name at time. If these community
names are not defined, SNMP module cannot work, being unable to manage
SNMP command. Widely used names are “public” for GET and TRAP
community, and “private” for SET community.
Examples
To modify COMMUNITY SET name:
SET SNMP COMMUNITY SET=private
SET SNMP MANAGER
Syntax
SET SNMP MANAGER=ipaddress
Short Syntax
S SNMP MAN=ipaddress
where:
 ipaddress is the an ip address in dotted decimal notation, of TRAP manager
server
Description
This command sets the ip address of the machine SNMP agent sends trap
messages to.
Examples
To set snmp MANAGER:
SET SNMP MANAGER=192.160.0.11
SHOW SNMP
Syntax
SHOW SNMP [COMMUNITY ={SET | GET | TRAP}] |
[MANAGER]
Short Syntax
SH SNMP [COMMUNITY ={SET | GET | TRAP}] | [MANAGER]
Description
This commands shows SNMP module configuration.
Figure 16. Example output from the SHOW SNMP command.
01234567890123456789012345678901234567890123456789