Operation Manual

SIP
SIP Software Release 6-0-0
J613-M0524-00
55
will be assigned dynamically.
 tospriority is a number from 0 to 7
 dscppriority is a number from 0 to 63
Description
This command allows to set different parameters of an already created port.
For the option meaning please refer to the CREATE SIP PORT command.
Examples
To change a port 1 phone number:
SET SIP PORT=0 PHONENUMBER=000888
SHOW SIP PORT
Syntax
SHOW SIP [DEFAULTPORT] | [NATIP] | [PORT=port
[PHONENUMBER | DOMAIN | AUTHORIZATION
LOCATIONSERVER | PROXYSERVER | REGISTERED |
CAPABILITY | RTPPORT | TOS | DSCP]]
Short Syntax
SH SIP [DP] | [NI] | [PORT=port [PHONENUMBER |
DOMAIN | AUTHORIZATION LOCATIONSERVER | PROXYSERVER
| REGISTERED | CAPABILITY | RTPPORT | TOS | DSCP]]
Description
This commands shows the SIP ports configuration. To get information on all
the ports the command must be used without any option.
To get a specific parameter, like PHONENUMBER, the port must be
indicated along with the required filed. The parameter is returned as is,
since this command invocation is designed for web interface.
Figure 15. Example output from the SHOW SIP PORT command.
01234567890123456789012345678901234567890123456789
SIP Port information
----------------------------------------------------------
Default port 5050
NAT IP Address 10.10.1.10
Port 0
Phone Number 000555
Authorization UserName: "[e-mail]"
Password: "welcome"
Domain alliedtelesyn.com
Location Server 192.168.0.5
Proxy Server 192.168.0.5
TOS 0
Registered YES
Capability PCMU
G723