Operation Manual

AT-RG213 Residential VoIP Gateway - SIP Software Reference Manual
SIP Software Release 6-0-0
J613-M0524-00
40
Command Reference
SET DNS IP
Syntax
SET DNS IP HOST=hostname IPADDRESS=ipaddress
Short Syntax
S DNS IP HOST=hostname IPADDRESS=ipaddress
where:
 hostname is a domain name as defined in ‘‘IETF RFC-1034, ‘Domain Names ---
Concepts and facilities’’’. It must be less or equal than 256 characters.
 ipaddress is an ip address in dotted decimal notation
Description
This command adds or modifies a static entry in the host name table.
Examples
To add the IP address for host name “Zaphod” to the host name table,
use:
SET DNS IP HOST= Zaphod IPADDRESS=172.16.8.3
See Also
SHOW IP HOST
SET DOMAIN
Syntax
SET DOMAIN=hostname
Short Syntax
S DO=hostname
where:
 hostname is a domain name as defined in ‘‘IETF RFC-1034, ‘Domain Names ---
Concepts and facilities’’’. It must be less or equal than 256 characters.
Description
This command specifies the host domain.
Examples
To set the domain as ati.com, use:
SET DOMAIN=ati.com
See Also
SET IP NAMESERVER
SET IP SECONDARYNAMESERVER
SET IP NAMESERVER
Syntax
SET IP NAMESERVER=ipaddress