Operation Manual

IP
SIP Software Release 6-0-0
J613-M0524-00
35
SHOW IP IGMP
Syntax
SHOW IP IGMP
Short Syntax
SH IP IGMP
Description
This command displays information about IGMP, and multicast group
members for each VLAN.
See Also
DISABLE IP IGMP
ENABLE IP IGMP
SET IP IGMP
Figure 7. Example output from the SHOW IP command.
0123456789012345678901234567890123456789012345678901234567890123456789
IGMP protocol
---------------------------------------------------------------------------
Leave Time 10.0 Sec.
Query Interval 125 Sec.
Timeout Interval 120 Sec.
Interface Name default VLAN
Multicast Router
Port: WAN Last Adv: 10.17.39.1 Refresh time: 48 Sec.
Group List
Group: 230.20.20.25
Port: WAN Last Adv: Multicast Filter Refresh time: 44 Sec.
Port: LAN2 Last Adv: 10.17.39.3 Refresh time: 72 Sec.
Group: 230.20.20.26
Port: WAN Last Adv: Multicast Filter Refresh time: 44 Sec.
Port: LAN2 Last Adv: 10.17.39.3 Refresh time: 72 Sec.
Group: 230.20.20.28
Port: LAN1 Last Adv: 10.17.39.4 Refresh time: 12 Sec.
Port: LAN3 Last Adv: 10.17.39.8 Refresh time: 75 Sec.
Port: LAN2 Last Adv: 10.17.39.231 Refresh time: 92 Sec.
Group: 230.20.20.21
Port: WAN Last Adv: Multicast Filter Refresh time: 53 Sec.
Port: LAN1 Last Adv: 10.17.39.2 Refresh time: 68 Sec.
Group: 230.20.20.22
Port: LAN1 Last Adv: 10.17.39.2 Refresh time: 68 Sec.
Group: 230.20.20.24
Port: LAN2 Last Adv: 10.17.39.3 Refresh time: 72 Sec.
---------------------------------------------------------------------------
Table 13. Parameters displayed in the output of the SHOW IP IGMP
command.
Parameter Meaning
Leave Time
Duration of the Leave Period timer.