Manualshelf

Operation Manual

ManualsBrandsAllied Telesis ManualsOtherAT-RG213
41424344454647484950
IP
SIP Software Release 6-0-0
J613-M0524-00
31
ENABLE NTP
Syntax
ENABLE NTP
Short Syntax
EN NTP
Description
This command enables the NTP module. This must be called before any
other command of this module.
Examples
To enable the NTP module:
ENABLE NTP
ENABLE TELNET
Syntax
ENABLE TELNET
Short Syntax
EN TELNET
Description
This command enables the TELNET module and allows to access CLI
remotely with telnet protocol
Examples
To enable the TELNET module:
ENABLE TELNET
PING
Syntax
PING ipaddr
where:
ipaddr is an ip address in dotted decimal notation
Description
This command sends IP echo request packets to the given ip address
(ipaddr).
Examples
To ping 192.168.1.10:
PING 192.168.1.10
SET IP IGMP
Syntax
SET IP IGMP [QUERYINTERVAL=1..65535]
[LEAVETIME=0..65535] [TIMEOUT=1..65535]