Operation Manual

AT-RG213 Residential VoIP Gateway - SIP Software Reference Manual
SIP Software Release 6-0-0
J613-M0524-00
30
DISABLE IP IGMP
Syntax
DISABLE IP IGMP
Short Syntax
DIS IP IGMP
Description
This command disables IGMP snooping support.
Examples
To disable the IGMP support:
DISABLE IP IGMP
See Also
ENABLE IP IGMP
SET IP IGMP
SHOW IP IGMP
ENABLE IP IGMP
Syntax
ENABLE IP IGMP
Short Syntax
EN IP IGMP
Description
This command enables IGMP snooping to run. Multicast traffic will be
isolated per VLAN.
The switch provides the following services for each VLAN:
 IGMP Snooping
 IGMP proxing to present all members attached to switch as would be connected
together.
 Supports till eight membership groups; specific multicast path are defined for
each one to minimize the LAN bandwith use.
Remarks:
The multicast traffic is transfered in broadcast either the IGMP module is
disabled or the packets belongs not handle groups because membership
group number exceeds the maximum allowed entries.
Only IGMP v1 and v2 are supported.
Examples
To enable the IGMP module:
ENABLE IP IGMP
See Also
DISABLE IP IGMP
SET IP IGMP
SHOW IP IGMP