Manualshelf

Operation Manual

ManualsBrandsAllied Telesis ManualsOtherAT-RG213
41424344454647484950
IP
SIP Software Release 6-0-0
J613-M0524-00
29
Command Reference
ADD NTP SERVER
Syntax
ADD NTP SERVER=ipaddr [DEFAULT]
Short Syntax
A NTP SERVER=ipaddr [DEFAULT]
where:
ipaddr is an ip address in dotted decimal notation
Description
This command adds a NTP server to the internal list that contains maximum
10 entries. If the DEFAULT option is used, this will be the preferred server
and the others will be used only on the default server failure. The first
server added to the list will be always the DEFAULT even if the option is
not used.
Examples
To set the 194.35.252.7 as NTP server:
ADD NTP SERVER=194.35.252.7
See Also
DELETE NTP SERVER
SHOW NTP
DELETE NTP SERVER
Syntax
DELETE NTP SERVER=ipaddr
Short Syntax
DEL NTP SERVER=ipaddr
where:
ipaddr is an ip address in dotted decimal notation
Description
This command deletes an NTP server from the internal list that contains
maximum 10 entries.
Examples
To delete the 194.35.252.7 as NTP server:
DELETE NTP SERVER=194.35.252.7
See Also
ADD NTP SERVER