Operation Manual

AT-RG213 Residential VoIP Gateway - SIP Software Reference Manual
SIP Software Release 6-0-0
J613-M0524-00
16
Table 9. Parameters displayed in the output of the SET LOADER
command.
Parameter Meaning
FILE
The default file previously set with SET LOADER
FILE=… command
SERVER
The default file previously set with SET LOADER
SERVER=… command
SHOW SYSTEM
Syntax
SHOW SYSTEM [NAME | CONTACT | LOCATION | PRODUCT |
BOOTV | APPV | HWREV | FLASH | RAM]
Short Syntax
SH SYS [NAME | CONTACT | LOCATION | PRODUCT | BOOTV
| APPV | HWREV | FLASH | RAM]
Description
This command shows the major information relevant to the equipment
configuration and status including the one previously set by SET SYSTEM
command. To request a specific parameter, its name must be included in the
command. The intent of this option is to allow the access of this information
from the web interface.
See Also
SET SYSTEM
Figure 3. Example output from the SHOW SYSTEM command.
01234567890123456789012345678901234567890123456789
System Information
--------------------------------------------------
General
Name: NAME
Contact: CONTACT
Location: LOCATION
------------------------------------------------
Software
Protocol: SIP
Application File: rg1-sip-6-0-0.bin
Application Version: APPV
Boot Version: BOOTV
------------------------------------------------
Equipment
Product Name: PRODUCT
Hardware Revision: HWREV
Platform: RG213
Flash Size (Kbytes): FLASH
RAM Size (Kbytes): RAM