Operation Manual

Operation
SIP Software Release 6-0-0
J613-M0524-00
13
See Also
LOAD IMAGE
LOAD CONFIG
SET PASSWORD
Syntax
SET PASSWORD
Short Syntax
SET PASSWORD
Description
This command allows changing login password. Please note that the change
can become permanent only after a new CREATE CONFIG. The password
length must be between 3 and 15 characters length.
Examples
To change the login password
SET PASSOWORD
Old Password:
New Password:
Confirm:
See Also
CREATE CONFIG
SET SYSTEM
Syntax
SET SYSTEM [NAME=name] [LOCATION=name]
[CONTACT=name]
Short Syntax
S SYS [N=name] [L=name] [C=name]
where:
 name is an string of maximum 30 ASCII characters. If space is included, the
string must be enclosed in double quotes.
Description
This command allows to set three important variables that are used
throughout the system: system name (NAME), system contact (CONTACT)
and device location (LOCATION).
Examples
To set the above mentioned variables:
SET SYSTEM NAME=cpe CONTACT=”Bob Kent”
LOCATION=”Milan Office, 4th floor”