Operation Manual

AT-RG213 Residential VoIP Gateway - SIP Software Reference Manual
SIP Software Release 6-0-0
J613-M0524-00
10
 ipaddr is an ip address in dotted decimal notation
Description
This command allows to load in the device flash a configuration script from
a tftp server. If the server is not given the one previously set with the
command SET LOADER is used. The name of the configuration script will
be the same of the filename and if a script with the same name already exists
in the flash, this will be overwritten.
Examples
To load the configuration script script.cfg from the server
192.168.1.10:
LOAD CONFIG=script.cfg SERVER=192.168.1.10
See Also
SHOW CONFIG
VIEW CONFIG
CREATE CONFIG
DELETE CONFIG
SET CONFIG
SAVE CONFIG
LOAD IMAGE
Syntax
LOAD IMAGE=filename [SERVER=ipaddr]
Short Syntax
L IM=filename [SERVER=ipaddr]
where:
 filename is a file name that can contain up to 20 characters excluding | ; , ! @ #
$ ( ) < > / \ " ' `~ { } [ ] = + & ^ <space> <tab>.
 ipaddr is an ip address in dotted decimal notation
Description
This command allows to load in the device flash the application from a
tftp server. If the server or the file is not given the one previously set with
the command SET LOADER is used.
Examples
To load the application image rg1-sip-6-0-0.bin from the server
192.168.1.10:
LOAD IMAGE FILE=rg1-sip-6-0-0.bin
SERVER=192.168.1.10
See Also
SET LOADER