Operation Manual

AT-RG213 Residential VoIP Gateway - SIP Software Reference Manual

SIP Software Release 6-0-0

J613-M0524-00

Make sure you remember the new password you create, as a lost password cannot be

retrieved, and would mean losing access for configuring and monitoring the AT-

RG213.

Entering Commands

The AT-RG213 is controlled with commands described in this document.

While the keywords in commands are not case sensitive, the value entered

for some parameters are. The AT-RG213 supports command line editing and

recall (see Table 6).

Table 6. Command line editing functions and keystrokes

Function

VT100-compatible Keystroke

Move cursors within command

line

←, →

Delete character to left of cursor [Delete] or [Backspace]

Recall previus command

↑

Recal next command

↓

File Subsystem

FLASH memory is structured like a file subsystem. Files can be saved, listed

and deleted. Release files, online help files, configuration scripts and other

scripts are all stored as files in FLASH memory. Names must have DOS

format, with a filename of up to eight characters and an extension of three

characters.

To display the files in FLASH, use the command:

SHOW CONFIG

01234567890123456789012345678901234567890123456789

Filename Size Created

--------------------------------------------------

boot.cfg 675 25-Feb-2001 12:01:24

remote.cfg 1987 14-Feb-2001 10:01:24

--------------------------------------------------

Boot Configuration Script: boot.cfg

--------------------------------------------------

Online CLI Help

Online help is available for all modules in the CLI.

An online help facility provides more detailed help information via the

command: