Operation Manual

Operation

SIP Software Release 6-0-0

J613-M0524-00

 Connect a VT100-compatible terminal to the RS-232 Terminal Port, set the

communication parameters on the terminal (seeTable 5), and press [Enter] a

few times until the AT-RG213 login prompt appears; or

 Connect the COM port of a PC running terminal emulation software such as

Windows Terminal or HyperTerminal to the RS-232 Terminal Port, set the

communications parameters on the emulation software (see Table 5), and press

[Enter] a few times until the AT-RG213 login prompt appears.

Table 5. Parameters for terminal communication

Parameter

Value

Baud rate 38400

Data bits 8

Parity None

Stop bits 1

Flow control Hardware

Operating the AT-RG213

This chapter introduces general operation, management and support

features, including user authentication, loading and installing support files,

and SNMP MIBs.

Logging in

A user accessing the AT-RG213 from a terminal or PC connected to the side

panel RS-232 terminal port, or via a Telnet connection, must enter a login

name and password to gain access to the command prompt.

When the AT-RG213 is supplied, it has a manager account with an initial

password friend.

Enter your login name at the login prompt:

Enter the password at the password prompt:

password: friend

This password should be changed to prevent unauthorized access to the AT-

RG213, using the command:

SET PASSWORD