Operation Manual

Preface
SIP Software Release 6-0-0
J613-M0524-00
xiii
Command syntax is defined using these conventions:
This Is used for
CAPS
Keywords to be typed as shown. In general keywords may
be abbreviated to the shortest string that is unambiguous
within the current context. The exception is commands with
a profound effect, such as RESTART IMMEDIATELY, which
must be typed in full.
Italic
A variable placeholder, to be replaced by an actual value in a
command.
[]
Square brackets enclose optional items. Enter the item or
items required, but do not type the brackets.
|
Vertical bars separate choices in a list — choose one of the
items.
...
Ellipses indicate that the preceding element may be repeated
any number of times
n..m
Defines a range of values from n to m inclusive. n and m are
decimal numbers.
interface
An interface type — one of:
ETHn
for Ethernet interfaces
VLANn
for Virtual LAN interface.
n
when defining one of the above interface types. n is a non-
negative, zero-based decimal number.
Ipaddr
An IP address in dotted decimal form (e.g.
131.203.9.197). In some situations an address in
domain name format.
Macadd
A hardware address (such as an Ethernet address) of the
form
XXXXXXXXXXXX, where XX is a two-digit
hexadecimal number with leading zeros if necessary.
Commands are described under Command Reference within the section to
which they apply. Each command is described in the following format: