Operation Manual

Switch

SIP Software Release 6-0-0

J613-M0524-00

101

Table 28. Parameters displayed in the output of the SHOW SWITCH QOS

command.

Parameter Meaning

Priority Map

The map shows the High priority DSCP code.

SHOW VLAN

Syntax

SHOW VLAN={vlanname|1..4094|ALL}

Short Syntax

SH VLAN={vlanname|1..4094|ALL}

Where:

 vlanname is a unique name for the VLAN, 1 to 15 characters in length.

Valid characters are uppercase letters (A-Z), lowercase letters (a-z),

digits (0-9) the underscore character (‘‘_’’), and the hyphen character (-).

The vlanname cannot be a number or ALL.

Description

This command displays information about the specified VLAN. If no VLAN

or ALL is specified, then all VLANs are displayed.

Examples

To display information on the marketing VLAN, use the command:

SHOW VLAN=marketing