Operation Manual

Switch
SIP Software Release 6-0-0
J613-M0524-00
99
Table 27. Parameters displayed in the output of the SHOW SWITCH
PORT COUNTER command.
Parameter Meaning
Combined
receive/transmit
packets by size (octets)
counter
The number of packetsin each size range
received and tranmitted.
64 Number of 64 octet packets received and
transmitted.
65 – 127 Number of 65 - 127 octet packets received and
transmitted.
128 – 255 Number of 128 - 255 octet packets received and
transmitted.
256 – 511 Number of 256 - 511 octet packets received and
transmitted.
512 – 1023 Number of 512 - 1023 octet packets received
and transmitted.
1024 – 1522 Number of 1024 - 1522 octet packets received
and transmitted.
General Counter
Receive
Counters for traffic received.
Octets The number of octets.
Pkts The number of packets.
FCSerrors The number of frames containing a Frame
Check Sequence error.
MulticastPkts The number of multicast packets.
BroadcastPkts The number of broadcast packets.
PauseMACctlFrms The number of valid PAUSE MAC Control
frames.
OversizePkts The number of oversize packets.
Fragments The number of fragments.
Jabbers The number of jabbers frames.
MACControlFrms The number of MAC Control frames (Pause
and Unsupported).
UnsupportCode The number of MAC Control frames with
unsupported opcode (i.e. not Pause).
AlignmentErrors The number of frames with alignment errors.
SymErDurCarrier The number of frames with invalid data
symbols.
UndersizePkts The number of undersized packets.
Transmit
Counters for traffic transmitted.
Octets The number of octets.
Pkts The number of packets.
MulticastPkts The number of multicast packets.
BroadcastPkts The number of broadcast packets.