Operation Manual

AT-RG213 Residential VoIP Gateway - SIP Software Reference Manual
SIP Software Release 6-0-0
J613-M0524-00
98
SHOW SWITCH PORT COUNTER
Syntax
SHOW SWITCH PORT={port-list|ALL} COUNTER
Short Syntax
SH SWITCH PORT={port-list|ALL} CNT
Where:
 port-list is an identifier or a comma separated list of port identifiers. Port
identifier could be: VOIP, WAN, LAN1, LAN2 and LAN3.
Description
This command displays information about the forwarding counters
associated with the switch.
Examples
To display the switching counters of port WAN, use the command:
SHOW SWITCH PORT=WAN COUNTER
See Also
Figure 28. Example output from the SHOW SWITCH PORT COUNTER
command.
0123456789012345678901234567890123456789012345678901234567890123456789
Switch counter
---------------------------------------------------------------------------
Port: WAN
Combined receive/transmit packets by size (octets) counters:
64 65 256 - 511 0
65 – 127 5 512 – 1023 0
128 - 255 0 1024 – 1522 0
General Counters:
Receive: Transmit:
Octets 246 Octets 4320
Pkts 0 Pkts 57
FCSerrors 0 MulticastPkts 0
MulticastPkts 0 BroadcastPkts 0
BroadcastPkts 3 PauseMACctlFrms 0
PauseMACctlFrms 0 FrameWDeferrdTx 0
OversizePkts 0 SingleCollsnFrm 0
Fragments 0 MultCollsnFrm 0
Jabbers 0 LateCollsns 0
MACControlFrms 0 ExcessivCollsns 0
UnsupportCode 0 CollisionFrames 0
AlignmentErrors 0
SymErDurCarrier 0
UndersizePkts 0
Miscellaneous Counters:
DropEvents 0
totalPktTxAbort 0
---------------------------------------------------------------------------