Operation Manual

Switch

SIP Software Release 6-0-0

J613-M0524-00

[PORT={port-list|ALL}] | [VLAN={vlanname|1..4094}]]

Where:

 macadd is an Ethernet six-octet MAC address, expressed as six pairs of

hexadecimal digits delimited by hyphen

 port-list is an identifier or a comma separated list of port identifiers. Port

identifier could be: VOIP, WAN, LAN1, LAN2 and LAN3.

 vlanname is a unique name for the VLAN, 1 to 15 characters in length. Valid

characters are uppercase letters (A-Z), lowercase letters (a-z), digits (0-9) the

underscore character (‘‘_’’), and the hyphen character (-). The vlanname cannot

be a number or ALL.

Description

This command displays the contents of the Forwarding Database.

The ADDRESS parameter specifies the MAC address of the device for which

the contents of the Forwarding Database are to be displayed.

The PORT parameter specifies that only those entries in the Forwarding

Database which were learned from the specified port are to be displayed.

The VLAN parameter specifies the VLAN identifier of the VLAN for which

the contents of the Forwarding Database are to be displayed.

Examples

To display the contents of the Forwarding Database, use the command:

SHOW SWITCH FDB