Operation Manual

AT-RG213 Residential VoIP Gateway - SIP Software Reference Manual

SIP Software Release 6-0-0

J613-M0524-00

See Also

DELETE VLAN PORT

Syntax

DELETE VLAN={vlanname|1..4094} PORT={port-list|ALL}

Short Syntax

D VLAN={vlanname|1..4094} PORT={port-list|ALL}

where:

 vlanname is a unique name for the VLAN, 1 to 15 characters in length. Valid

characters are uppercase letters (A-Z), lowercase letters (a-z), digits (0-9) the

underscore character (‘‘_’’), and the hyphen character (-). The vlanname cannot

be a number or ALL.

 port-list is an identifier or a comma se

arated list of

ort identifiers.

Port identifier could be: VOIP, WAN, LAN1, LAN2 and LAN3.

Description

This command deletes ports from the specified VLAN. An untagged port

can be deleted from a VLAN if the port is still a member of a VLAN after the

deletion has occurred. If the port does not belong to any VLAN as a tagged

port then the port is implicitly added to the default VLAN as an untagged

port. It is not possible to delete a port that belongs only to the default VLAN

as an untagged port.

The VLAN parameter specifies the name or numerical VLAN Identifier of

the VLAN. The name is case insensitive. The VLAN must already exist.

The PORT parameter specifies the ports to be deleted from the VLAN. If

ALL is specified, then all ports belonging to the VLAN are deleted. If the

command would succeed on a subset of the ports specified, but cause an

error on the others, then the command as a whole will fail and have no

effect.

Examples

To delete port 3 from the marketing VLAN, use the command:

DELETE VLAN=marketing PORT=3