Datasheet

MCF2xxx SERIES | Fast Ethernet Media Converters
Allied T
elesis www.alliedtelesis.com
Software Management Features
Active Controls
• Enable/disable RS232
•
Enable/disable Telnet
• Enable/disable SNMP
• Configure/delete user accounts (up to 10)
• Configure/delete user passwords
• Reset management card
• Reset chassis
• Download/upload firmware via TFTP
• Download/upload config via TFTP
• Download/upload firmware via Xmodem
• Download/upload config via Xmodem
• Download/upload firmware via memory card
• Download/upload firmware via memor
y car
d
• Download config to media blades
• Upload config from media blades
• IP address
• Subnet mask
• Gateway
• Set SNMP management addresses
• Chassis name
• Chassis location
• Set temperature thr
eshold
• Set media blade name
• Set media blade port name
• Enable/disable port link
• Enable/disable port MissingLink
• Enable/disable port Smart MissingLink
• Enable/disable port auto-negotiation
• Enable/disable port full-duplex
•
Enable/disable por
t auto MDI/MDI-X
•
Enable primar
y management master
Chassis Information
• Part number
•
Serial number
• Revision
• User-defined identifier
• User-defined location
Blade/Port Module Information
• Media blade type
• Slot occupied
• Part number
• Serial number
• Configuration
• Revision
• Ports on module
• User-defined identifier
• User-defined port identifier
Blade/Port Module Status
• Diagnostic status
• Port link status
• Port link / MissingLink / Smart MissingLink
Status
• Port activity
• Port auto-negotiation status
• Port duplex status
•
P
ort auto MDI/MDI-X status
Events / Alarms / Traps
• Cold start
•
Warm start
• Link up/down
• Blade insertion/removal
• Fan module insertion/removal
• Power supply module insertion/removal
• Stacking link Up/down
• Authenication failure
• Chassis reset
• Module reset
• Temperature threshold crossed
• Power supply failure
• Fan speed failure
• TFTP session open/close
• Xmodem session open/close
• Telnet session open/close
• Redundant management secondary up/down*
• Redundant management primary up/down*
* Future release