User Manual
Table Of Contents
- Contents
- Figures
- Tables
- Preface
- Chapter 1
- Overview
- Chapter 2
- Installation
- Reviewing Safety Precautions
- Cable Requirements
- Unpacking the AT-MCF2000M Management Module
- Setting the Chassis ID Jumper
- Installing the Management Module
- Cabling a Media Converter Stack
- Verifying the Installation
- Starting a Local Management Session
- Removing the AT-MCF2000M Management Module
- Installing a Media Converter Module
- Chapter 3
- Troubleshooting
- Appendix A
- Technical Specifications

9
Table 1: Safety Symbols .................................................................................... 12
Table 2: General Status LEDs ............................................................................ 33
Table 3: Link/Activity LED on the RS-232 Terminal Port .................................... 34
Table 4: Link/Activity LED on the Management Port .......................................... 35
Table 5: Duplex-mode/Collisions LED on the Management Port ....................... 36
Table 6: Link/Activity LED on the Management Port .......................................... 36
Table 7: SD Slot LED ......................................................................................... 37
Table 8: Cable Requirements for the 10/100/1000Base-T Management Port ... 42
Table 9: Cable Requirements for the Stack Port ................................................ 43
Table 10: 10/100/1000Base-T Management Port Pinouts at 10 or 100 Mbps ... 68
Table 11: 10/100/1000Base-T Management Port Pinouts at 1000 Mbps .......... 69
Table 12: RS-232 Terminal Port ......................................................................... 70
Tables