User manual

CONNECTING THE AT-IMG634 – R2
ADSL cable connection
Plug the ADSL cable into the ADSL port until you hear a “click” and make sure it is
correctly fixed by lightly pulling the ADSL cable. In the same way, Connect the plug on
the other end of the ADSL cable to the terminator.
LAN Cable connection
Push in the plug of the UTP cable to the LAN port until you hear a “click” and make
sure it is correctly fixed by lightly pulling the UTP cable. In the same way connect the
plug on the other end of the UTP cable to the network interface card of the computer,
or of the other LAN device.
Disconnecting power supply
This product doesn’t have a switch; it turns on automatically by connecting the power
cable. To turn it off, just remove the power plug.
⇒ Note about functions and services (AT-iMG634 – R2)
The VoIP Telephony provider may not offer all of the services that a standard telephony
network usually provides. Similarly, some telephone or fax functions may not be available on
the VoIP network. Please contact your VoIP Telephony provider for further details.