User guide

Circuit Emulation Command Reference Overview
iMG/RG Software Reference Manual (LAN Module Management)
10-18
Description This command allows the user to specify whether or not rtp packets are to be used for
transmission.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example ces set pspan pspan-1 rtpenabled false
10.5.1.1.16 CES SHOW DEVICE
Syntax CES SHOW DEVICE
Description This command allows the user to display the status of the CES daughter card.
Example ces show device
CES Device level settings
--------------------------
Port Type DS1
Local IP Interface ces (8.8.8.1)
10.5.1.1.17 CES LIST ALARMS
Syntax CES LIST ALARMS
Description This command shows all the alarms that have been raised on the CES daughter-card and
when.
Example ces list alarms
1970/01/01 00:00:19.55: Raised Communication Failed on pspan-1
1970/01/01 00:00:24.84: Raised Loss of Signal on tdm-1
10.5.1.1.18 CES SHOW ALARMS
Syntax CES SHOW ALARMS
Description This command shows all the current alarms on the CES daughter-card.
Example ces show alarms
Entity | Raised | Alarm Name
Option Description Default Value
pspan_port The network based connection associated with the
TDM port on the card (TDM-1 and PSPAN-1 or TDM-
2 and PSPAN-2)
-none-
state True for sending RTP packets true