User guide

Circuit Emulation Command Reference Overview
iMG/RG Software Reference Manual (LAN Module Management)
10-16
10.5.1.1.11 CES SET PSPAN LOCALUDP
Syntax CES SET PSPAN <pspan_port> LOCALUDP <port_number>
Description This command allows the user to source udp port number to be used in when transmit-
ting packets over the network.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example ces set pspan pspan-1 localudp 50001
10.5.1.1.12 CES SET PSPAN PAYLOADBYTES
Syntax CES SET PSPAN <pspan_port> PAYLOADBYTES <numbytes>
Description This command allows the user to determine how much data is sent in each packet. It is a
trade-off between latency and the number of packets sent. For voice applications, 48 is
preferred.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example ces set pspan pspan-1 payloadbytes 48
Option Description Default Value
pspan_port The network based connection associated with the
TDM port on the card (TDM-1 and PSPAN-1 or TDM-
2 and PSPAN-2)
-none-
Port_number The udp port number to be used when creating pack-
ets for transmission
-none-
Option Description Default Value
pspan_port The network based connection associated with the
TDM port on the card (TDM-1 and PSPAN-1 or TDM-
2 and PSPAN-2)
-none-
Num_bytes The number of bytes of source data in each packet. It
can range from 16 to 1023.
1023