User guide

Overview Circuit Emulation Command Reference
10-15
iMG/RG Software Reference Manual (LAN Module Management)
10.5.1.1.9 CES SET PSPAN IPDSCP
Syntax CES SET PSPAN <pspan_port> IPDSCP <priority_level>
Description This command allows the user to configure a priority level for all the RTP packets that are
being sent over the PSPAN.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example ces set pspan pspan-1 ipdscp 33
10.5.1.1.10 CES SET PSPAN JITTERDEPTH
Syntax CES SET PSPAN <pspan_port> JUTTERDEPTH <msecs>
Description This command allows the user to configure a jitter depth for the pspan. For voice applica-
tions – 1000 is a good value.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example ces set pspan pspan-1 jitterdepth 1000
Option Description Default Value
pspan_port The network based connection associated with the
TDM port on the card (TDM-1 and PSPAN-1 or TDM-
2 and PSPAN-2)
-none-
Priority_level The DSCP priority level to be used. 46
Option Description Default Value
pspan_port The network based connection associated with the
TDM port on the card (TDM-1 and PSPAN-1 or TDM-
2 and PSPAN-2)
-none-
msecs The depth in milli-seconds of the Jitter Buffer – ranges
from 164 to 74272
6000