User guide

Circuit Emulation Command Reference Overview
iMG/RG Software Reference Manual (LAN Module Management)
10-14
10.5.1.1.7 CES SET PORT TIMINGREFERENCE
Syntax CES SET PORT <tdm_port> TIMINGREFERENCE <timing_reference>
Description This command allows the user specify the timeing reference to be used. It is important
that the timing reference be correctly selected so that there is only one source on the
link.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example ces set port tdm-1 timingreference self
10.5.1.1.8 CES SET PSPAN DISABLED
Syntax CES SET PSPAN <PSPAN_PORT> DISABLED <STATE>
Description This command is used to enable or disable the Ethernet side of the circuit.
The following table gives the range of values for each option, which can be specified with this command, and a
default value (if applicable).
Example ces set pspan pspan-1 disabled true
Option Description Default Value
Tdm_port The Physical port on the card (TDM-1 or TDM-2) -none-
Timing_refere
nce
The source of the timing reference to be used
internal: from an internal oscillator
self: from the TDM circuit
connection: from the pspan
connection
Option Description Default Value
pspan_port The network based connection associated with the
TDM port on the card (TDM-1 and PSPAN-1 or TDM-
2 and PSPAN-2)
-none-
state True for disabling – False for enabling false