User guide

Circuit Emulation Command Reference Overview
iMG/RG Software Reference Manual (LAN Module Management)
10-12
Example ces set port tdm-1 disabled true
10.5.1.1.4 CES SET PORT LINEBUILDOUT
Syntax CES SET PORT <tdm_port> LINEBUILDOUT <buildout>
Description This command adjusts the power output of the TDM port.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example ces set port tdm-1 linebuildout 00db
10.5.1.1.5 CES SET PORT LINEENCODING
Syntax CES SET PORT <tdm_port> LINEENCODING <encoding>
Description This command allows the user to specify the encoding method to be used.
Option Description Default Value
Tdm_port The Physical port on the card (TDM-1 or TDM-2) -none-
state True for disabling – False for enabling false
Option Description Default Value
Tdm_port The Physical port on the card (TDM-1 or TDM-2) -none-
buildout The attenuation to place on the line
neg75db
neg150db
neg225db
neg133
neg266
neg399
neg533
neg655
NA
00db