User guide

Overview Circuit Emulation Command Reference
10-11
iMG/RG Software Reference Manual (LAN Module Management)
10.5.1.1.1 CES SET DEVICE IPINT
Syntax CES SET DEVICE IPINT <ip_name>
Description This command associates an IP interface with the CES service – thus providing it with an
IP address.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example ces set device ipint cesip
10.5.1.1.2 CES SET DEVICE PORTTYPE
Syntax CES SET DEVICE PORTTYPE <port_type>
Description This command allows the user to specify the type of TDM port that is to be used.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example ces set device porttype DS1
10.5.1.1.3 CES SET PORT DISABLED
Syntax CES SET PORT <TDM_PORT> DISABLED <STATE>
Description This command is used to enable or disable the TDM side of the circuit.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Option Description Default Value
IP_name An existing ip interface with an IP address assigned.
This IP is used to terminate communication for
PSPANs terminated on this device.
-
Option Description Default Value
Port_type The TDM port configuration – DS1 or E1. DS1