User guide

Overview HPNA Command Reference
10-7
iMG/RG Software Reference Manual (LAN Module Management)
0 00:0c:25:13:90:1b Down True V3 1.7.5
Host 001 Behind Device 0 00:02:b3:98:56:6b
Host 002 Behind Device 0 00:30:b6:35:68:80
Host 003 Behind Device 0 00:18:8b:a7:f3:e8
Number of HPNA stations=1
Total number of devices=4
10.3.1.0.6 HPNA SHOW PERFORMANCE
Syntax HPNA SHOW PERFORMANCE [<sourcemac> <destmac>]
Description This command is Service Affecting and will take on the order of a minute or more
Optional parameters sourcemac and destmac allow the user to limit the diagnostic run to
a particular pair of HPNA endpoints – rather than running the diagnostics on all possible
pairings. The sourcemac and destmac are the MAC Addresses of the HPNA Endpoints.
Execute the HPNA SHOW STATIONS command to find the possible MAX addresses.
Example hpna show performance
warning: This command is service affecting
CERT Test Results...
Source MAC -->Destination MAC
00:01:02:03:00:03-->00:13:ba:00:01:56: pkts: 1000/1000 per: 0
snr 41.08 db, rate: 128Mbps 16/8 Rx power: -6.967 dBm
00:13:ba:00:01:56-->00:01:02:03:00:03: pkts: 1000/1000 per: 0
snr 43.17 db, rate: 128Mbps 16/8 Rx power: -.4288 dBm
10.3.1.0.7 HPNA UPGRADE ENDPOINT
Syntax HPNA UPGRADE ENDPOINT < targetMac|All >
Option Description Default Value
sourcemac Source mac address for targeted performance testing
-
destmac Destination mac address for targeted performance testing
-