User guide

HPNA Command Reference Overview
iMG/RG Software Reference Manual (LAN Module Management)
10-6
Description Command zeros out the counters for the associated HPNA device or all devices if the
string “All” is entered
Example hpna reset counters All
10.3.1.0.4 HPNA SHOW STATIONS
Syntax HPNA SHOW STATIONS
Description This command shows the MAC Addresses of all the HPNA devices on the HPNA net-
work plus a little info about them.
Example hpna show stations
HPNA Stations Attached to Host...
HPNA HPNA
Device MAC Link Sync Mode SW
0 00:01:02:03:00:03 Up True V3 1.7.4
1 00:13:ba:00:01:56 Up False V2 1.7.1
Number of HPNA stations=2
Total number of devices=4
10.3.1.0.5 HPNA SHOW STATIONS ALL
Syntax HPNA SHOW STATIONS ALL
Description This command provides the same information as above, but also displays all the MAC
addresses that originated from behind each HPNA endpoint.
Example hpna show stations All
HPNA Stations Attached to Host...
HPNA HPNA
Device MAC Link Sync Mode SW
Option Description Default Value
TargetMac | All Mac address of the target device for which to reset
counters. All will display counter for all attached stations
and the Master.
-