User guide

Software update SwUpdate module
iMG/RG Software Reference Manual (System Configuration)
1-66
FIGURE 1-9 SwUpdate scheduling example 2
1.4.3.4 Manually enabling SwUpdate
It is possible turn on (disable) and turn off the SwUpdate module manually using the swupdate start and
swupdate stop command.
If SwUpdate was disabled and the download finish successfully, SwUpdate returns to the disable state.
If SwUpdate was disabled and the download fails, SwUpdate stays enabled and scheduled with the same rules
defined in previous sections.
If SwUpdate was enabled and the download finish successfully, SwUpdate stays enabled with the schedule time
defined by the Start and Stop Time.
If SwUpdate was enabled and the download fails, SwUpdate stays enabled and scheduled with the same rules
defined in section previous sections.
1.4.3.5 Plug-and-play
Default operational mode
minute
hours
day-of-month
month
day-of-week
00:00
Start Time 0 0, 6, 12 x x x
minute
hours
day-of-month
month
day-of-week
Stop Time 0 4, 10, 16 x x x
06:00
10:00
12:00
16:00
20:00
00:00
Monday Thursday
00:00
Fall
Fall Fall Fall FallFall
06:00
random (15 secs - Retry-Period)