User guide

Overview HPNA Command Reference
10-5
iMG/RG Software Reference Manual (LAN Module Management)
Description This command displays the packet counters for the master node of the HPNA Network.
Note that it is possible to get related switch counters via the appropriate switch com-
mand
Example hpna show counters All
Device MAC Link Sync Mode SW
0 00:0c:25:13:90:1b Down True V3 1.7.5
HPNA Network to Port Interface Counters
HpnaTxPkt : 54920
HpnaTxBcastPkt : 23944
HpnaTxMcastPkt : 16511
HpnaTxByte : 6020335
HpnaTxShort : 0
HpnaTxDropped : 2
HpnaRxPkt : 285
HpnaRxBcastPkt : 0
HpnaRxMcastPkt : 0
HpnaRxByte : 20032
HpnaRxShort : 0
HpnaRxDropped : 0
HpnaRxCrc : 0
HPNA Control Packet Counters
HpnaControlReqPkt : 286
HpnaControlReplyPkt : 286
HpnaRemControlReqPkt : 0
HpnaRemControlReplyPkt : 0
HPNA Physical Layer Utilization
HpnaPerCyclePercentTx : ( 1%)
HpnaPerCyclePercentIdle : ( 99%)
HpnaAccumulatedPercentTx : ( 1%)
HpnaAccumulatedPercentIdle : ( 99%)
10.3.1.0.3 HPNA RESET COUNTERS
Syntax HPNA RESET COUNTERS <TargtMac|All>
Option Description Default Value
TargetMac | All Mac address of the target device for which to show
counters. All will display counter for all attached sta-
tions and the Master.
All