User guide

Wireless Interface CLI commands Wireless Interface
9-31
iMG/RG Software Reference Manual (Wireless)
* Feature present only on FIBER D / ADSL B group wireless products
WPAEnableTKIP Possible values are:
False - Disable TKIP with WPA1 authentica-
tion
Tr ue - Enable TKIP also for WPA1 authentica-
tion, this is the normal mode of operation for
WPA1
Tru e
WPAEnableWPA1 Possible values are:
False - Disable the WPA1 standard authenti-
cation method
Tr ue - Enable the WPA1 support if WPA is
also enabled
Tru e
WPAEnableWPA2 Possible values are:
False - Disable the WPA2 authentication
method
Tr ue - Enable the WPA2 (802.11i) standard
support if WPA is also enabled
Tru e
WepAuthentication Possible values are:
False - Disable WEP Authentication (Open
system wireless network)
Tr ue - Enable WEP Authentication (Shared
system wireless network)
False
WepEncryption Possible values are:
Disabled - No WEP encryption
64bit - Enable 40-bit encryption
128bit - Enable 104-bit encryption
Disabled
resetDefaults Mark the port in order to don’t save its config-
uration and to acquire its default values at
next reboot. Possible values are:
False - Allow saving new port configuration
and keeping it after reboot
Tr ue - Do not save port changes when saving
system configuration, letting the port acquire
its default values at next reboot
False
Option Description Default Value