User guide

Wireless Interface Wireless Interface CLI commands
iMG/RG Software Reference Manual (Wireless)
9-26
Option Description Default Value
Authentication Configuration command to be used in con-
junction with “Encryption” to easily set up an
authentication configuration for the network
Possible values are:
Open - Set an open authentication network
Shared - Set a shared authentication network
WPA-PSK - Set a WPA/WPA2 authentica-
tion network
Open
AutoChannel Possible values are:
False - Disable AutoChannel feature
Tr ue - Enable AutoChannel feature: allow the
AP to select the best channel on startup
Tru e
CurrentCountry It sets the current 802.11d country string for
the wireless card.
The driver will only show the possible values
depending on the countries that it actually
supports.
The form of a country string is the two-byte
ISO code for that country (from ISO 3166)
US
DefaultChannel Default Channel to use. The default value
should be the minimum allowed for this band
(e.g. 1 for802.11b) unless the device is able to
auto-select
n/a
DefaultTxKey Specifies which encryption key to use by
default (offset into the list of 64/128 bit keys
depending on the value of “WepEncryption”
attribute)
0
Disable Possible values are:
False - Wireless interface is enabled, wireless
connection is allowed
Tr ue - Wireless interface is disabled, wireless
network can be seen but no connection will
be allowed
False