User guide

Wireless Interface CLI commands Wireless Interface
9-25
iMG/RG Software Reference Manual (Wireless)
Entropy Pool : a508abe250752d01f0aae300146ff200
Supplicants:
None
9.1.6.2 Port Wireless commands
The table below lists the port wireless commands provided by the CLI:
TABLE 9-3 Port Wireless Commands
1)
The command Port Wireless Set IntraBSSRelay 2 is not available on ADSL A
9.1.6.2.1 PORT WIRELESS COUNTERS
Syntax PORT WIRELESS COUNTERS
Description This command shows the value of the attribute WPAMICFailures (WPA Message Integ-
rity Code failures) of the wireless device.
Example -->
port wireless counters
WPAMICFailures = 0
9.1.6.2.2 PORT WIRELESS SET
Syntax PORT WIRELESS SET <option> <value>
Description This command allows to set configuration parameters of the wireless device. Any modifi-
cation overrides the existing attribute values previously set.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Functions
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E Modular
ADSL
A
ADSL
B
ADSL
C
PORT WIRELESS COUNTERS XXX
PORT WIRELESS SET X
X
1
X
PORT WIRELESS SHOW XXX
PORT WIRELESS STATUS XXX