User guide

Wireless Interface Wireless Interface CLI commands
iMG/RG Software Reference Manual (Wireless)
9-24
9.1.6.1.3 802.1X AUTHENTICATOR SET KEY-TRANSMISSION
Syntax
802.1x AUTHENTICATOR SET KET-TRANSMISSION {ENABLED | DISABLED}
Description This command enables/disables key-transmission according to 802.11 specifications.
9.1.6.1.4 802.1X AUTHENTICATOR SET REKEY-TIMEOUT
Syntax 802.1x AUTHENTICATOR SET REKEY-TIMEOUT <sec>
Description This command sets the WEP rekey timeout that causes the issue of a new WEP key for
the session. Once set to a suitable timeout, the keys will rotate at a rate fast enough to
prevent an attacker from sniffing enough packets in order to discover the WEP key.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
9.1.6.1.5 802.1X AUTHENTICATOR SHOW
Syntax 802.1x AUTHENTICATOR SHOW
Description This command returns the status of 802.1x settings
Example --> 802.1x authenticator show
802.1x Authenticator
Auth Server : Local
Auth Control Enabled : true
Identity String : VoIP gateway 00:01:38:b6:3e:99
Rekey Timeout : 600
Key Transmission Enabled : true
Vap Id : 0
Option Description Default Value
string A string used for identification pur-
poses. If not configured manually, the
model name and device’s MAC
Address is displayed.
Model Name and MAC address
(i.e.iMG634WA-R2-main
00:0d:da:05:51:8f)
Option Description Default Value
sec The time (in seconds) before a WEP key is rotated. 600