User guide

Wireless Interface CLI commands Wireless Interface
9-23
iMG/RG Software Reference Manual (Wireless)
TABLE 9-2 802.1x Authenticator Commands
9.1.6.1.1 802.1X AUTHENTICATOR SET AUTHENTICATION
Syntax 802.1x AUTHENTICATOR SET AUTHENTICATION <value>
Description This command allows to enable/disable authentication methods with 802.1x standard,
accordingly to 802.11 specifications.
Options The following table gives the range values for each option that can be specified with this
command and a default value (if applicable).
9.1.6.1.2 802.1X AUTHENTICATOR SET IDENTITY
Syntax 802.1x AUTHENTICATOR SET IDENTITY <string>
Description This command allows to set a unique identity string for the device. The authenticator will
use this string to identify the device.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Functions
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
802.1X AUTHENTICATOR SET AUTHENTICATION XXX
802.1X AUTHENTICATOR SET IDENTITY XXX
802.1X AUTHENTICATOR SET KEY-TRANSMISSION XXX
802.1X AUTHENTICATOR SET REKEY-TIMEOUT XXX
802.1X AUTHENTICATOR SHOW XXX
Option Description Default Value
value Possible values are:
Local - Set a local server as device authentication method
(using MD5)
Disable - Disable authentication on the device, manda-
tory for Open/Shared system wireless networks.
Enable - Set the CPE as authenticator in the WPA/WAP2
system wireless network
Local