User guide

Summary of wireless attribute and configurations Wireless Interface
9-21
iMG/RG Software Reference Manual (Wireless)
port wireless set Disable false
port wireless set ESSID iMG634WA-ST-172.32.2.142 (example)
802.1x authenticator set authentication local
802.1x authenticator set authentication enabled
port wireless set Authentication WPA-PSK
port wireless set Encryption TKIP
wpa set shared passphrase friendfriend (example)
9.1.4.4 WPA2-PSK Authentication and AES_CCMP Encryption
WPA2 (formerly IEEE 802.11i) is an evolution of WPA and uses a new strong AES-based encryption algorithm,
CCMP (Counter Mode with CBC-Message Authentication Code Protocol), which is considered fully secure.
On CPE side, a WPA2-PSK AES_CCMP encryption wireless network can be configured through the following
CLI commands list:
port wireless set Disable false
port wireless set ESSID iMG634WA-ST-172.32.2.142 (example)
802.1x authenticator set authentication local
802.1x authenticator set authentication enabled
port wireless set Authentication WPA-PSK
port wireless set Encryption AES_CCMP
wpa set shared passphrase friendfriend (example)
9.1.4.5 WPA2 Mixed Mode Authentication
Using this configuration, wireless clients of both types (WPA and WPA2) can connect to the device.
On CPE side, a WPA2 Mixed Mode encryption wireless network can be configured through the following CLI
commands list:
port wireless set Disable false
port wireless set ESSID iMG634WA-ST-172.32.2.142 (example)
802.1x authenticator set authentication local
802.1x authenticator set authentication enabled
port wireless set Authentication WPA-PSK
port wireless set Encryption WPA2_Mixed
wpa set shared passphrase friendfriend (example)
9.1.5 Summary of wireless attribute and configurations
The configuration commands <port wireless set Authentication/Encryption ...> acts
directly on the wireless port attributes in order to set up the desired authentication configuration. The follow-