User guide

RFC1483 RFC1483 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-166
See also RFC1483 LIST TRANSPORTS
RFC1483 SET TRANSPORT RXVPI
RFC1483 SET TRANSPORT TXVPI
8.9.1.1.20 RFC1483 SHOW TRANSPORT
Syntax RFC1483 SHOW TRANSPORT {<name>|<number>}
Description This command displays the following information about an existing RFC1483 transport:
•Name
•Description
• Encapsulation method
•ATM port
• TX VPI - transmit Virtual Path Identifier
• RX VPI - receive Virtual Path Identifier
• TX VCI - transmit Virtual Circuit Identifier
• TX VCI - receive Virtual Circuit Identifier
• ATM Traffic Class
• PCR - Peak Cell Rate
• BT - Burst Tolerance
• SCR - Sustainable Cell Rate
• MBS - Maximum Burst Size
• MCR - Minimum Cell Rate
•Packet Priority Levels
Example The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
See also
Option Description Default Value
name An existing RFC1483 transport. To display transport names,
use the
RFC1483 LIST TRANSPORTS command.
N/A
number An existing RFC1483 transport. To display transport numbers,
use the
RFC1483 LIST TRANSPORTS command.
N/A