User guide

RFC1483 RFC1483 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-164
Example --> rfc1483 set transport my1483 txvpi 0
See also RFC1483 LIST TRANSPORTS
RFC1483 SET TRANSPORT RXVPI
8.9.1.1.18 RFC1483 SET TRANSPORT VCI
Syntax RFC1483 SET TRANSPORT {<name>|<number>} VCI <vci>
Description This command sets the Virtual Circuit Identifier channel. It overrides existing VCI set-
tings (including RX VCI and TX VCI).
The port/VCI/VPI combination must be unique for each transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing RFC1483 transport. To dis-
play transport names, use the
RFC1483 LIST TRANSPORTS
command.
N/A
number An existing RFC1483 transport. To dis-
play transport numbers, use the
RFC1483 LIST TRANSPORTS
command.
N/A
txvpi A field in the ATM header. The TX VPI is
used to identify the virtual path that a
circuit belongs to and transmits informa-
tion on. The TX VPI can be any value
between 0 and 9999999999.
VPI value set when the transport
was created using the rfc1483 add
transport command
Option Description Default Value
name An existing RFC1483 transport. To display
transport names, use the
RFC1483
LIST TRANSPORTS
command.
N/A
number An existing RFC1483 transport. To display
transport numbers, use the
RFC1483
LIST TRANSPORTS
command.
N/A